Repair Tools & Equipment

For iPhone 14 / 14 Plus JCID Tag On Battery Data Repair Flex Cable

£11.50 £13.80 Inc. VAT

Out of stock

Tag on flex cable for repairing / programming battery data. Move the battery service and cycle data from the old battery to the new one and reset battery health. Compatible with the JC V1S device and battery add on board for reprogramming.

WYLIE Heat Resistant Thermal Insulation Pad For iPhone Screen IC Transplant – Pack Of 5

£5.00 £6.00 Inc. VAT

Out of stock

Heat resistant flexible pad for removing the screen IC on an iPhone screen. Pad slides under the flex to help prevent over heating the screen.

For iPhone 6 to iPhone 14 Pro Max i2C KC01 Battery Repair Programming Tool

£25.00 £30.00 Inc. VAT

Out of stock

Portable device powered by USB-C for re-programming tag on flex cables and enabling battery repair without the pop-up message. ..:: Functions:
  • Read and write data at the bottom of the battery.
  • Health and number of cycles changed.
  • Running cycle efficiency increases automatically.
  • Supports for iPhone 8-14 PD fast charging.
  • Online software updates unlimited.
  • Supports offline and online operations.
  • Support charging voltage and current detection.

RELIFE RL-066B Easy Back Glass Adjustable Breaking Blaster Pen Tool

£8.95 £10.74 Inc. VAT

Out of stock

When replacing the back glass on iPhone or any other brand it can be easier when the glass is broken into smaller pieces. The RELIFE RL-066B now makes that possible, simply place the tool in the area you want broken and push down. The tool will punch into the glass and crack it. Adjustable force to avoid unnecessary damage.

RELIFE RL-724A High Precision Torque Screwdriver Tool Set

£23.95 £28.74 Inc. VAT

Out of stock

5 piece high precision torque screwdriver set. Anti-slip due to excessive force, the torque will not allow over tightening and prevent damage. Suitable for disassembly and maintenance of various telecommunications and electronic equipment. Tools include: T1, 0.8 Pentalobe, 2.5 Pinhead Philips, 0.6 Tri-point and 1.5 Philips.

For iPhone 13 Pro / Pro Max / 14 Pro / Pro Max JC V1S Pro / V1SE Series True Tone Programming Add-On Board

£26.00 £31.20 Inc. VAT

Out of stock

Replacement add-on board for the JC V1SE and V1S Pro to enable programming of True Tone on the iPhone 13 Pro, iPhone 13 Pro Max, iPhone 14 Pro and iPhone 14 Pro Max.
Read / write brightness and Eeprom data of Samsung and LG screens.
Latest improved board with built in IC.

Supports programming with and without the original screen (wihout requires unbinding).

TBK 568R Heat Mat Pad Screen Back Separator For Phone / Tablet Repair

£47.95 £57.54 Inc. VAT

Out of stock

Safe and efficient temperature controlled heating mat. Perfect for heating up phone and tablet screens and backs to allow easier removal. Suitable for iPhone, iPad and all other phones and tablets. Mat includes convenient holders for screwdrivers and USB ports for powering phones.

RELIFE CP-0002 Black Multipurpose Glue / Adhesive 50ml

£3.00 £3.60 Inc. VAT

Out of stock

Non hardening waterproof adhive for for a wide range of uses. High elasticity perfect for phone frame, LCD and back glass fitting.

Sunshine SS-022D Double Head Copper Dual Purpose Brush

£3.50 £4.20 Inc. VAT

Out of stock

Suitable for mobile phone maintenance IC pad cleaning, motherboard deglue and tin removal, polishing, etc. The brush head can be replaced and expanded via a multi-turn screw head. Bristle brush and fine wire brush for use according to different needs.

Goot Wick De-Soldering Wick 2.0mm x 1.5m

£2.50 £3.00 Inc. VAT

Out of stock

1.5m length of 2.0mm thick de-soldering wick. Helps remove excess solder with the use of a soldering iron.

JCID Rear Camera Tag-On Repair FPC For iPhone 12

£20.00 £24.00 Inc. VAT

Out of stock

Tag on flex cable for use with the JCID V1SE and V1S Pro repair tools. Enables the repair of code matching and pop up window problems caused by non-genuine or replacement camera. Reprogram the tag on flex to enable the replacement of the wide andgle rear camera.

QianLi Macaron Portable Spot Welding Machine Gen 2 For iPhone 11-14

£39.00 £46.80 Inc. VAT

Out of stock

Compact portable spot welding machine. Perfect for removing and re-fixing the battery protection board on iPhone batteries. The swapping of the battery protection board will enable you to remove the warning message in iOS of battery change. Generation 2 device with latest improvements. Battery fixing boards included for all models from iPhone 11 up to and including iPhone 14 Pro Max.

RELIFE RL-936WD Magnetic Spot Welding Battery Fixture

£9.50 £11.40 Inc. VAT

Out of stock

Suitable for spot welding of all kinds of batteries. Fix the battery protection plate and the battery to avoid poor welding effect caused by the shaking of the flux. Highly consistent, stable clamping, no scratches or deformation of battery parts.

JCID Tag On Dot Matrix Projector Face-ID Repair Flex Cable FPC For iPhone X

£8.00 £9.60 Inc. VAT

Out of stock

Tag on flex cable for use with the JCID V1S, V1SE and V1S Pro repair tools. Enables the repair of Face-ID errors caused by a faulty Dot Projector without soldering! Reprogram the tag on flex to enable the repair of projector module and fix Face ID.

JCID Tag On Dot Matrix Projector Face-ID Repair Flex Cable FPC For iPhone 11 Pro / 11 Pro Max

£8.00 £9.60 Inc. VAT

Out of stock

Tag on flex cable for use with the JCID V1S, V1SE and V1S Pro repair tools. Enables the repair of Face-ID errors caused by a faulty Dot Projector without soldering! Reprogram the tag on flex to enable the repair of projector module and fix Face ID.

JCID Tag On Dot Matrix Projector Face-ID Repair Flex Cable FPC For iPhone 12 / 12 Pro

£9.00 £10.80 Inc. VAT

Out of stock

Tag on flex cable for use with the JCID V1S, V1SE and V1S Pro repair tools. Enables the repair of Face-ID errors caused by a faulty Dot Projector without soldering! Reprogram the tag on flex to enable the repair of projector module and fix Face ID.

RELIFE RL-936WB Mini Portable Battery Spot Welding Machine

£27.50 £33.00 Inc. VAT

Out of stock

Compact portable spot welding machine. Perfect for removing and re-fixing the battery protection board on iPhone batteries. The swapping of the battery protection board will enable you to remove the warning message in iOS of battery change.

Sunshine SS-057UR UV AR Anti-Reflective Fiberglass Protective Film (25 Pieces)

£39.95 £47.94 Inc. VAT

Out of stock

Suitable for front/rear films of mobile phones, watches, AirPods, cameras, etc. Only 0.08mm thick, invisible protection. Using high-transmittance optical materials, the light transmittance is as high as 95%. No fear of strong light reflection and whitening of the screen, provides the best visual experience. The complex process structure adopts ultra-precision processing technology. UV microcrystalline hardening process, effectively prevents sharp objects from scratching the surface.

JC V1S Pro / V1SE iPhone 12 – 14 Series True Tone Programming Add-On Board All Screens

£25.00 £30.00 Inc. VAT

Out of stock

Replacement add-on board for the JC V1SE and V1S Pro to enable programming of True Tone on the iPhone 12, 12 mini, 12 Pro, 12 Pro Max, 13, 13 mini, 14 and 14 Plus. Read / write brightness and Eeprom data of Original and Compatible screens. Latest improved board with built in IC.

JC V1S Pro / V1SE Face ID Activation Read & Write Adapter Add-On Board

£25.00 £30.00 Inc. VAT

Out of stock

JCID Face ID activation read & write adapter board. Enables the repair of Face-ID errors caused by a faulty Dot Projector without soldering! Used to reprogram the tag on flex to enable the repair of the front camera / projector module and fix Face ID.

JCID V1SE WiFi Smart Data Programmer

£75.00 £90.00 Inc. VAT

Out of stock

JCID V1SE Wifi programmer is a multi purpose programmer for iPhone models. Changeable adaptors that support programming functions such as True Tone, battery BMS swap, dot projector repair, FPC receiver, vibration motor and much more. Compatible with all add on boards for the V1S, V1SE and V1S Pro.

JC V1S Pro / V1SE iPhone True Tone Receiver FPC Detection Adapter Add-On Board – NEW Version

£18.95 £22.74 Inc. VAT

Out of stock

JCID ear speaker receiver FPC detection adapter / programmer. Solve the problem of no auto photosensitive and no true tone caused by damaged or missing original FPC flex. JCID X-13PM receiver detection adaptor works with JCID V1SE/V1S Pro programmer and JC earpiece distance photosensitive sensor cable flex.

For iPhone 13 Pro Max Reusbale BMS Tag On Battery Flex Cable

£3.95 £4.74 Inc. VAT

Out of stock

Reusbale pre-programmed BMS tag on battery flex cable. Enables 100% battery health and 0 cycle count without the need of an external programmer! Once used to program the battery the flex can be disconnected and used again on another phone.

For iPhone 13 Pro Reusbale BMS Tag On Battery Flex Cable

£3.95 £4.74 Inc. VAT

Out of stock

Reusbale pre-programmed BMS tag on battery flex cable. Enables 100% battery health and 0 cycle count without the need of an external programmer! Once used to program the battery the flex can be disconnected and used again on another phone.